低轨纳卫星质量矩姿态控制技术研究

针对气动力矩严重影响低轨纳卫星姿态控制效果的问题,创新性地提出了利用质量矩技术将气动干扰转化为控制力矩的解决方法.由于气动力矩矢量垂直于大气来流速度方向,因而采用质量矩与磁力矩相结合的方式三轴全驱动控制卫星姿态,从而避免系统欠驱动. 建立双执行机构控制方式的姿态动力学模型,并根据各干扰项的影响简化了控制方程.针对气动力不确定、星体参数误差、未知环境影响等复杂干扰,设计了针对理想控制力矩基于干扰观测器的滑模控制器. 为减小滑块附加干扰力矩,研究了理想控制力矩的最优分配策略. 最后, 为双执行机构搭建了半物理仿真平台,结果表明: 姿态机动过程中, 与滑块加速度相关的附加惯性力矩远大于其他干扰项,最优力矩分配策略能够大幅减小快时变的附加干扰, 优化效果明显; 姿态保持过程中,干扰观测器能有效观测系统慢时变干扰, 提高滑模控制律的姿态控制精度,姿态角收敛误差小于$\pm $0.1$^\circ$.最终验证了在低轨纳卫星上利用质量矩技术控制姿态的可行性.      

Alignment and efficiency-monitoring method of high-power fiber-to-fiber coupling

High-power fiber-to-fiber coupling is extensively used in fiber laser applications,and its performance is determined by coupling efficiency.We demonstrate a novel method for alignment and monitoring efficiency by detecting backscattering power at the fiber end cap.The relationship between alignment error and backscattering power is determined by simulations and experiments.Through this method,a state-of-the-art kW-level fiberto-fiber optic switch is developed(transmission efficiency>97%).It performs well for longer than 60 min.To the best of our knowledge,it is the first time to establish the mathematical model based on this method.Our results can provide guidance in high-power fiber-to-fiber coupling.     

H2S gas sensor based on integrated resonant dual-microcantilevers with high sensitivity and identification capability

Detection of trace-level hydrogen sulfide (H₂S) gas is of great importance whether in industrial production or disease diagnosis. This research presents a novel H₂S gas sensor based on integrated resonant dual-microcantilevers which can identify and detect trace-level H₂S in real-time. The sensor consists of two integrated resonant microcantilever sensors with different functions. One cantilever sensor can identify H₂S by outputting positive frequency shift signals, while the other cantilever sensor will detect H₂S as a normally used cantilever sensor with negative frequency shifts. Combined the two cantilever sensors, the proposed gas sensor can distinguish H₂S from a variety of common gases, and the detection limit to H₂S of the sensor is as sensitive as below 1 ppb.     

Study of electron-vibrational interaction and concentration quenching effect of Cu+ ions in lithium based sulphate phosphors

The objective of this work is to study electron-vibrational interaction (EVI) and concentration quenching and their manifestation in experimental photoluminescence spectra of Cu⁺ ion in various lithium based phosphors namely, Li₂SO₄, LiNaSO₄ and LiKSO₄. The main parameters of EVI, such as the Stokes shift, Huang-Rhys factor and zero-phonon line positions, were estimated. The studied systems shows strong electron lattice coupling. The validity of results was established by modeling the shape of the emission spectra, which was found to be in good agreement with experimental photoluminescence spectra. The concentration quenching study is also carried out for these compounds. The studied systems correspond to the nearest neighbor energy transfer mechanism.     

Protein Staining Agents from Cationic and Neutral Luminescent Iridium(III) Complexes

Seven luminescent iridium(III) complexes were prepared to investigate the relationships between chemical structures and properties of protein staining. For the first time, the effect of the main ligand, the π conjugation effect of the ancillary ligand, and the charge effect of organometallic complexes on protein staining has been revealed. Most importantly, this study gives the first experimental evidence of the potential applications of charge‐neutral organometallic complexes in protein staining, which could open an avenue of exploiting novel protein staining agents in the future.     

ZnO nanowire lines and bundles: Template-deformation-guided alignment for patterned field-electron emitters

One-dimensional ZnO materials have been promising for field-emission (FE) application, but how to facially control the alignment of ZnO emitters is still a great challenge especially for patterned display application. Here, we report the fabrication of novel ZnO nanowire (NW) line and bundle arrays for patterned field-electron emitters. The effects of PS template size and heating time on the resulted ZnO nanoarrays were systematically studied. The deformation degree of PS templates was controlled and hence utilized to adjust the alignment of electrochemically deposited ZnO arrays. It was found that the length of NW lines and the density of NW bundles can effectively tuned by the PS template heating time. The optimal FE performance with turn-on electric field as low as of 4.4 V μm⁻¹ and the field-enhancement factor as high as of 1450 were achieved through decreasing the screening effect among the patterned field-electron emitters.     

Length scale effects in epoxy: The dependence of elastic moduli measurements on spherical indenter tip radius

Significant increases in the measured elastic moduli with decreasing indentation depth have been previously found in various polymers by indentation tests with a Berkovich tip at micro-to nanometer length scales. These increases in the determined elastic moduli were related to second order displacement gradients which increase with decreasing depth when a conical tip is applied. When a spherical tip is applied, such depth dependence should not be present as the second order displacement gradients remain essentially unchanged with indentation depth. However, these gradients should be proportional to the radius of the spherical tip. To examine the notion of second order displacement gradient dependence in measurements of elastic moduli, indentation experiments are conducted on epoxy with spherical tips of different nominal radii. Accounting for tip imperfections, an increase in the determined elastic moduli is found with decreasing tip radius, which corroborates the notion of second order displacement gradient dependence.